Milk Pumps & Controls

Fristam Centrifugal Milk Pumps - The Fristam 2 kW centrifugal milkpump is a top of the range, precision, investment cast pump. Gentle fluid handling, robust, low maintenance, long service life and cost effective – Fristam centrifugal pumps are the optimal solution for pumping milk in larger dairies.

All Fristam pumps are equipped with open impellers, ideally suited for use in hygiene applications. Specially selected stainless steel alloys provide the basis for trouble free operation. High quality Non Return Valves ensure trouble free operation. 

• Suitable for clean in place systems ( CIP ) • Discharge pressures up to 110 m head • Available with 2.2kW motors 400V 3 ph • Flow rate up to 20,000 litres with 18 m head • Can be operated from a Waikato ABB 6322    variable speed flow control system

 
 

Flomax

Flomax Centrifugal Milk Pumps - Centrifugal milk pumps are commonplace in most farm dairies. They offer compact size and high performance and are more than capable of pumping the volume from large, modern milking systems.

Available in sizes from .75kW to 2.2kW, centrifugal milk pumps can be tailored to suit your requirements and operated by variable speed controls.

• Rugged stainless steel construction • Designed to suit a wide variety of applications • Easy to service and change seals • IP55 rated motor • Available in three phase or single phase • Four blade impeller option for use with variable speed   control systems • Sanitary finish. All product contact surfaces are    stainless steel and comply to the New Zealand Dairy    Code of  Practice NZCP1 • External ceramic mechanical seals comply to American   3A  standards • Foot mounted motors • Fiberglass motor cover available

Milk Recovery

Milk Recovery - Electric/Compressed Air - Being able to purge your milking system at the end of milking can provide an added advantage, increasing the milk volume in the bulk tank by as much as 60L per milking, depending of course on the size and length of your delivery line.

Whatever the case, you will save milk that,  if not purged, is normally diluted with water and run to waste. A Milk Recovery Unit is easy to install with a new milking system or as a retrofit to existing machines. Calculate what lost milk could be costing you, then invest in a product that could put these dollars back in the bank.

• Electrically timed - pneumatically driven • Suitable for use with most compressed air systems • Adjustable and regulated pressure setting • Timing from 1 to 60 seconds • Air filtered prior to entry into the milk system • When activated, the milk recovery system controller   delivers air close to the milkpump and gently empties   most of the residual milk in the delivery lines into the   bulk milk tank • Push button operation • Reduces the risk of  adding water to the bulk tank • Fast payback potential • Compressor optional at extra cost

Controls

6322 Milk Pump Controller - This controller has been developed specifically for use in the dairy industry. It controls the speed of your milkpump, to ensure the finest quality milk and the best possible performance from your plate cooler.

What sets it apart from the rest is its ability to integrate with other components like air injectors, cooler pumps and rotary automation kits. The ABB 6322 controller is a top-shelf product used exclusively by Waikato Milking Systems and supported by a world wide ABB technical network.

• 6 speed for milk and wash modes, using only one float • Reliable switch not affected by froth • Reliable milkpump operation • Full electric-motor overload protection • Can be operated by remote control • Can control air injectors and other ancillary equipment • Can be installed on any milkpump • One model available for motors up to 2.2kW/3PH/400v • Stainless steel IP65 cabinet

V15 Milk Pump Controller

V15 Milk Pump Controller - This controller provides solid performance and reliability.
 

• Powder coated IP65 enclosure ensures safe, dry   conditions for electrical equipment • Variable speed control increases and decreases milkpump   speed depending on flow into the receiver • Low cost, no frills option to milkpump control • Manual override switch • Switch between wash and milk mode • Simple and reliable ABB electronic equipment • Operates from a standard Waikato Milking Systems float • One model available for motors up to 1.5kW/3PH/400v